We have an Airtel broadband connection for some months now. But sharing the connection between the roomies was getting difficult. So we got a Netgear wireless router hoping that now I can kill the bandwidth when my mate is playing AOC đŸ˜€
Happily, I setup the wireless router with the internet now getting to us as <Airtel Router>–><Netgear router>–><The home network using the ethernet ports and wireless access>. I did the same setup at my office and it worked happily. But the same thing wasn’t working out in the house no matter what I did. The comps at home cudn’t even ping to the Airtel router. We were thinking that the router has come with some kind of firewall…giving all kind of theories….thot that it the router software might have got crashed. Even started up ethereal to see what is happening at the network level.
While propounding the theories, we figured out that the new router has come up with its own dhcp and dns server and it allocates the addresses starting from 192.168.1.2/24 (it reserves 1.1 for its own interface….and of course this is configurable once we can get the router up and running). Similar configuration of the dhcp and dns servers existed in Airtel router as well, so Airtel router also gave 192.168.1.1/24 to itself and allocates ip’s after that. So, we configured the airtel router to give itself 1.4 and allocate from 1.5 onwards. This gave us a network with all hosts having unique IPs, yet the computers were not able to talk to the airtel router.
Next day, it struck that we are trying to configure a router over here (not a switch or hub), so it must have different networks/subnets on each of its side. That was it….configuring the new router’s dhcp to allocate up in 172.16 network resolved the issue.
What is more frustating about this story is that during the process of figuring out the problem we looked for the troubleshooting…which stressed that the routers should be powered on and connected in a specified order. Moreover, that clearing the browser cache can resolve the problems. We were sure that it was not possible, yet we were following the instructions as any layman would….there goes what I have learnt in those 4 years….haven’t yet moulded my brains to apply the concepts immediately.